NAME
DATE
DESCRIPTION
REVISION LEVEL
NAME
DATE
DESCRIPTION
REV.
ECN NO.
IN HOUSE ASSEMBLY TEMPLATE
DWN
TITLE:
BY:
BY:
APR
DATE
DWN:
APR:
DATE
REVISION:
SCALE:
SHEET:
DRAWING NUMBER:
300 South Krueger Street
Suring, WI 54174
diversifiedwoodcrafts.com
BY:
APR
APR:
DATE
CONFIDENTIAL:
ALL DESIGN RIGHTS RESERVED
THE INFORMATION, DATA, DESIGN, AND DRAWINGS EMBODIED
IN THIS DOCUMENT AND ALL REPRODUCTIONS THEREOF ARE
THE EXCLUSIVE PROPERTY OF DIVERSIFIED WOODCRAFTS, INC.
THESE DOCUMENTS ARE SUPPLIED WITH THE UNDERSTANDING
THAT THEY WILL NOT BE DISCLOSED TO THIRD PARTIES WITHOUT
WRITTEN CONSENT OF DIVERSIFIED WOODCRAFTS, INC. ANY
REPRODUCTION IN PART OR WHOLE WITHOUT WRITTEN
CONSENT IS SUBJECT TO LEGAL ACTION.
ALL DIMENSIONS ARE IN INCHES UNLESS
NOTED OTHERWISE
DECIMALS:
ANGLES:
CABINET SQUARENESS
X7000 & X8000 SERIES TABLES
METAL ACTIVITY TABLE
ASSEMBLY INSTRUCTIONS
REV A
5 OF 9
NTS
EMR
3/3/14
NOTE:
1.
EMR
3/3/14
CREATED ASSEMBLY INSTRUCTIONS
A
-
STEP 3:
APPLY SILICONE ADHESIVE TO TOP EDGES OF LEG FLANGE.
INSERT HANGER BOLT ON ONE LEG THROUGH THE CORNER BRACKET AND
INSERT LOCK WASHER AND HECK NUT.
TIGHTEN BOLT USING A
1
2
" WRENCH OR
1
2
" SOCKET AND TORQUE WRENCH.
MAKE SURE LEG IS SCREWED ON TIGHT!
REPEAT FOR ALL OTHER LEGS.
**NOTE**
BE SURE TOP ASSEMBLY IS
ON A CLEAN SURFACE
TO PREVENT DAMAGE
CLOSE UP OF CORNER LEG ASSEMBLY
INSERT HANGER BOLT
THROUGH HERE WITH LOCK
WASHER AND HEX NUT
APPLY SILICONE
ADHESIVE TO
ENDS OF LEGS
LEG FLANGE -
TYPICAL
LEG
STEEL FRAME
K:\AutoCAD\Assembly Instructions\X7000 & X8000 SERIES TABLES.dwg, 11/19/2021 10:25:23 AM, DWG To PDF.pc3