NAME
DATE
DESCRIPTION
REVISION LEVEL
NAME
DATE
DESCRIPTION
REV.
ECN NO.
IN HOUSE ASSEMBLY TEMPLATE
UNLESS OTHERWISE SPECIFIED
DIMENSION ARE IN INCHES
DWN
TITLE:
BY:
BY:
APR
DATE:
DWN
APR:
DATE
REVISION:
SCALE:
SHEET:
DRAWING NUMBER:
300 South Krueger Street
Suring, WI 54174
diversifiedwoodcrafts.com
THIS DRAWING IS THE SOLE PROPERTY OF
DIVERSIFIED WOOD CRAFTS. IT MAY NOT
BE ALTERED OR CHANGED WITHOUT
PERMISSION
BY:
APR
APR:
DATE
W- WORKBENCHES
WOOD WORKBENCH
ASSEMBLY INSTRUCTIONS
REV A
4 OF 4
NTS
EMK
11/3/14
NOTE:
1.
EMK
11/3/14
CREATED ASSEMBLY INSTRUCTIONS
A
-
STEP 5:
INSERT STRETCHER ONCE THE LEG BRACES ARE IN POSITION.
ATTACH STRETCHER WITH CONFIRMATS PROVIDED. GO BACK
TO STEP 2 AND TIGHTEN UP THE HANGER BOLTS FOR EACH LEG
USING A
1
2
" WRENCH OR
1
2
" SOCKET AND TORQUE WRENCH,
TO A MINIMUM OF 12FT LBS BUT NOT TO EXCEED 17FT LBS .
STEP 6:
WITH HELP FROM ANOTHER PERSON, TIP TABLE ON ITS SIDE AND
SCREW ON SHELF TO THE BRACES WITH THE SCREWS PROVIDED.
STEP 7:
TURN TABLE OVER SO TOP IS UP. SET YOUR TABLE IN PLACE
AND ADJUST THE LEG LEVELERS TO LEVEL THE TABLE. SLIDE
LEG BOOTS DOWN TO THE FLOOR.
STRETCHER
SHELF
ATTACH SHELF
THROUGH HERE
ON BOTH BRACES
COMPLETE UNIT SHOWN
K:\DIVERSIFIED\ASSEMBLY INSTRUCTIONS\ACAD\W- WORKBENCHES.dwg, 11/25/2015 2:35:25 PM, DWG To PDF.pc3
