NAME
DATE
DESCRIPTION
REVISION LEVEL
NAME
DATE
DESCRIPTION
REV.
ECN NO.
IN HOUSE ASSEMBLY TEMPLATE
UNLESS OTHERWISE SPECIFIED
DIMENSION ARE IN INCHES
DWN
TITLE:
BY:
BY:
APR
DATE:
DWN
APR:
DATE
REVISION:
SCALE:
SHEET:
DRAWING NUMBER:
300 South Krueger Street
Suring, WI 54174
diversifiedwoodcrafts.com
THIS DRAWING IS THE SOLE PROPERTY OF
DIVERSIFIED WOOD CRAFTS. IT MAY NOT
BE ALTERED OR CHANGED WITHOUT
PERMISSION
BY:
APR
APR:
DATE
PR8 TABLES
ADJUSTABLE HEIGHT RISER TABLE
ASSEMBLY INSTRUCTIONS
REV A
3 OF 3
NTS
EMK
3/3/14
NOTE:
1.
TO INCREASE THE HEIGHT OF THE TABLE, PUT TABLE ON SIDE OR
BACK AND SIMPLY PULL ON THE BOTTOM OF EACH LEG.
2.
TO DECREASE THE HEIGHT OF THE TABLE, PUT TABLE ON SIDE OR
BACK AND MOVE THE ADJUSTABLE LEG TO THE HIGHEST SETTING.
IT WILL START TO RELEASE. PUSH THE LEG BACK TO A LOWER
SETTING.
EMK
3/3/14
CREATED ASSEMBLY INSTRUCTIONS
A
-
STEP 1:
LAY TABLE ON FLOOR OR ANOTHER CLEAN SURFACE
WITH APRON SIDE FACING UP. YOU MAY WANT TO HAVE
TWO OR THREE PEOPLE TO HELP YOU WITH THIS STEP, AS
TOP ASSEMBLY MAY BE HEAVY.
STEP 2:
TURN THE LEG SPACERS INTO THE BOTTOM OF THE
ADJUSTABLE LEG. TURN THE LEG LEVELERS INTO THE
BOTTOM OF THE LEG SPACERS.
STEP 3:
TAKE EACH OF THE TABLE LEGS AND SCREW THEM INTO
THE BOTTOM OF THE TABLE THROUGH THE PREDRILLED
HOLES WITH THE SCREW PROVIDED. MAKE SURE EACH
LEG IS SCREWED ON TIGHT USING A MAXIMUM OF 45 IN -
LBS OF TORQUE.
STEP 4:
TURN TABLE OVER SO TOP IS UP. SET YOUR TABLE IN
PLACE AND ADJUST THE LEGS TO DESIRED HEIGHT. SEE
NOTE ON HOW TO ADJUST HEIGHT OF TABLE.
APRON SIDE
FACING UP
LEG
LEG
SPACER
LEG
LEVELER
ATTACH LEGS TO TOP HERE
(REPEAT ON ALL LEGS)
COMPLETE UNIT SHOWN
K:\DIVERSIFIED\ASSEMBLY INSTRUCTIONS\ACAD\PR8 SERIES.dwg, 11/30/2015 7:59:22 AM, DWG To PDF.pc3
