NAME
DATE
DESCRIPTION
REVISION LEVEL
NAME
DATE
DESCRIPTION
REV.
ECN NO.
IN HOUSE ASSEMBLY TEMPLATE
UNLESS OTHERWISE SPECIFIED
DIMENSION ARE IN INCHES
DWN
TITLE:
BY:
BY:
APR
DATE:
DWN
APR:
DATE
REVISION:
SCALE:
SHEET:
DRAWING NUMBER:
300 South Krueger Street
Suring, WI 54174
diversifiedwoodcrafts.com
THIS DRAWING IS THE SOLE PROPERTY OF
DIVERSIFIED WOOD CRAFTS. IT MAY NOT
BE ALTERED OR CHANGED WITHOUT
PERMISSION
BY:
APR
APR:
DATE
LT-4424
LIGHT TABLE
ASSEMBLY INSTRUCTIONS
REV A
4 OF 5
NTS
EMK
3/4/14
NOTE:
1.
EMK
3/4/14
CREATED ASSEMBLY INSTRUCTIONS
A
-
STEP 4:
USING A 4MM ALLEN WRENCH, INSERT CONFIRMATS INTO
ONE OF THE LEGS AND SCREW INTO THE BRACE. REPEAT FOR
THE OTHER 3 LEGS. MAKE SURE BRACES ARE STRAIGHT AND
CONFIRMATS ARE TIGHT.
LEG LEVELER
CLOSE UP OF LEG LEVELER
ASSEMBLY
STEP 3:
SCREW LEG LEVELERS INTO
T-NUT ON BOTTOM OF LEGS.
STEP 5:
INSERT STRETCHER ONCE LEG BRACES ARE IN POSITION. ATTACH
STRETCHER WITH CONFIRMATS PROVIDED. GO BACK TO STEP 2
AND TIGHTEN UP THE HANGER BOLT FOR EACH LEG USING A
1
2
"
WRENCH OR
1
2
" SOCKET AND TORQUE WRENCH, TO A MINIMUM
OF 12FT LBS BUT NOT TO EXCEED 17FT LBS.
STEP 6:
TURN TABLE OVER SO LEGS ARE ON FLOOR. SET THE TABLE IN
PLACE AND ADJUST LEG LEVELERS TO LEVEL THE TABLE.
LEG BRACES
STRETCHER
COMPLETE UNIT SHOWN
K:\DIVERSIFIED\ASSEMBLY INSTRUCTIONS\ACAD\LT-4424.dwg, 11/25/2015 2:49:49 PM, DWG To PDF.pc3
