NAME
DATE
DESCRIPTION
REVISION LEVEL
NAME
DATE
DESCRIPTION
REV.
ECN NO.
IN HOUSE ASSEMBLY TEMPLATE
UNLESS OTHERWISE SPECIFIED
DIMENSION ARE IN INCHES
DWN
TITLE:
BY:
BY:
APR
DATE:
DWN
APR:
DATE
REVISION:
SCALE:
SHEET:
DRAWING NUMBER:
300 South Krueger Street
Suring, WI 54174
diversifiedwoodcrafts.com
THIS DRAWING IS THE SOLE PROPERTY OF
DIVERSIFIED WOOD CRAFTS. IT MAY NOT
BE ALTERED OR CHANGED WITHOUT
PERMISSION
BY:
APR
APR:
DATE
CDTC-73
TWO-STATION CPU TABLE
ASSEMBLY INSTRUCTIONS
REV D
4 OF 6
NTS
EMK
8/15/14
NOTE:
1.
EMK
8/15/14
CREATED ASSEMBLY INSTRUCTIONS
A
-
STEP 1:
LAY TOP ASSEMBLY ON FLOOR, WITH APRON SIDE FACING UP.
BE SURE TOP ASSEMBLY IS ON A CLEAN SURFACE TO PREVENT
DAMAGE.
STEP 2:
INSERT THE HANGER BOLT ON ONE OF THE CORNER LEGS THROUGH THE CORNER BRACKET AND INSERT THE LOCK WASHER AND HEX NUT.
USING A
1
2
" WRENCH OR
1
2
" SOCKET AND TORQUE WRENCH, SCREW ON THE NUT BUT DO NOT TIGHTEN ALL THE WAY. REPEAT FOR THE OTHER
3 CORNER LEGS. NOTE: THE TWO LEGS WITH A CHAMFER MUST GO ON THE FRONT OF THE TABLE WITH CHAMFERED EDGES FACING OUT
.
CLOSE UP OF CORNER LEG ASSEMBLY
INSERT HANGER BOLT
THROUGH HERE WITH LOCK
WASHER AND HEX NUT
APRON SIDE
FACING UP
EMK
10/15/14
ADDED WIRE MANAGEMENT
B
818
FRONT APRON
LEGS WITH A CHAMFER
NEED TO BE FACING OUT
CLOSE UP OF LEG WITH A CHAMFER
FRONT LEG
EMK
10/6/15
UPDATED ASSEMBLY COMPONENTS
C
-
EMK
10/9/15
UPDATED STEPS 3, 5, AND 6
D
-
K:\DIVERSIFIED\ASSEMBLY INSTRUCTIONS\ACAD\CDTC-73.dwg, 11/30/2015 11:05:00 AM, DWG To PDF.pc3
