ARS | AUGMENTED REALITY SERIES
https://system76.com/weekendproject/
I: Now you’ll capture tie-points at the middle height. Using a taller spacer, line-up your alignment target under
the white cross-hairs projected onto the sand surface:
Then press the
1
key to capture this tie-point. After a brief moment, the software will automatically
move the projected cross-hairs to the next tie-point.
Repeat this process for the remaining 11 tie-points at this depth. Once the white projected cross-hairs
are back at their original position, you’re ready to switch to a larger spacer.
J: Finally, you’ll capture tie-points at highest height. Using your tallest spacer (or stacking two spacers on top of
each other), line-up your alignment target under the white cross-hairs projected onto the sand surface:
Then press the
1
key to capture this tie-point. After a brief moment, the software will automatically
move the projected cross-hairs to the next tie-point.
Repeat this process for the remaining 11 tie-points at this depth. Once the white projected cross-hairs
are back at their original position, you’re done with the calibration!
K: Once you’ve completed the calibration, hit
Esc
to close the
Calibrate Projector
application.
Hitting
Esc
will automatically write the calibration file in
/etc/SARndbox-1.6/ProjectorMatrix.dat
