ASSEMBLY TEMPLATE
NOTE:
1.
REVISION LEVEL
EMK
11/2/16
CREATED DRAWING
REV.
A
-
DWN
TITLE:
BY:
BY:
APR
DATE
DWN:
APR:
DATE
REVISION:
SCALE:
SHEET:
DRAWING NUMBER:
BY:
APR
APR:
DATE
CONFIDENTIAL:
ALL DESIGN RIGHTS RESERVED
THE INFORMATION, DATA, DESIGN, AND DRAWINGS EMBODIED
IN THIS DOCUMENT AND ALL REPRODUCTIONS THEREOF ARE
THE EXCLUSIVE PROPERTY OF DIVERSIFIED WOODCRAFTS, INC.
THESE DOCUMENTS ARE SUPPLIED WITH THE UNDERSTANDING
THAT THEY WILL NOT BE DISCLOSED TO THIRD PARTIES WITHOUT
WRITTEN CONSENT OF DIVERSIFIED WOODCRAFTS, INC. ANY
REPRODUCTION IN PART OR WHOLE WITHOUT WRITTEN
CONSENT IS SUBJECT TO LEGAL ACTION.
ALL DIMENSIONS ARE IN INCHES UNLESS
NOTED OTHERWISE
CABINET SQUARENESS = ± .0625
FRACTIONAL VALUES = ± 1/32"
- ALL VALUES ± OVERALL -
FORWARD VISION I
FORWARD VISION I
ASSEMBLY INSTRUCTIONS
REV A
13 OF 18
NTS
EMK
11/2/16
NAME
DATE
DESCRIPTION
ECN NO.
STEP 9:
•
IF YOU DO NOT HAVE A 2916K, 2916KLH, 2936K, OR 2936KLH UNIT, SKIP
TO STEP 13.
•
LAYOUT END SINK FRAME WITH SQUARE EDGES OF APRONS ON FLOOR
AND BOTTOM OF LEGS FACING UP.
•
CONNECT LONG APRON AND SHORT APRON OF THE END SINK FRAME
TOGETHER BY USING THE CORNER LEG BRACKET.
•
MAKE SURE BRACKET IS FLUSH WITH SQUARE EDGES OF APRONS.
•
INSERT HANGER BOLT ON ONE OF THE LEGS THROUGH THE CORNER
BRACKET AND INSERT LOCK WASHER AND HEX NUT.
•
TIGHTEN NUT USING A
1
2
" WRENCH OR
1
2
" SOCKET AND TORQUE
WRENCH, TO A MINIMUM OF 12FT LBS BUT NOT TO EXCEED 17FT LBS .
•
REPEAT FOR OTHER CORNER LEG.
CLOSE UP OF CORNER LEG BRACKET ON
END SINK ASSEMBLY
LONG APRON
SHORT APRON
CORNER LEG BRACKET
(FLUSH WITH SQUARED
EDGES OF APRONS)
CORNER LEG
INSERT HANGER BOLT
THROUGH HERE WITH LOCK
WASHER AND HEX NUT
K:\AutoCAD\Assembly Instructions\2916K & KLH, 2936K & KLH, 2946K & KF,
2956K & KF SERIES.dwg, 4/15/2020 2:59:24 PM, DWG To PDF.pc3