NAME
DATE
DESCRIPTION
REVISION LEVEL
NAME
DATE
DESCRIPTION
REV.
ECN NO.
IN HOUSE ASSEMBLY TEMPLATE
DWN
TITLE:
BY:
BY:
APR
DATE
DWN:
APR:
DATE
REVISION:
SCALE:
SHEET:
DRAWING NUMBER:
300 South Krueger Street
Suring, WI 54174
diversifiedwoodcrafts.com
BY:
APR
APR:
DATE
CONFIDENTIAL:
ALL DESIGN RIGHTS RESERVED
THE INFORMATION, DATA, DESIGN, AND DRAWINGS EMBODIED
IN THIS DOCUMENT AND ALL REPRODUCTIONS THEREOF ARE
THE EXCLUSIVE PROPERTY OF DIVERSIFIED WOODCRAFTS, INC.
THESE DOCUMENTS ARE SUPPLIED WITH THE UNDERSTANDING
THAT THEY WILL NOT BE DISCLOSED TO THIRD PARTIES WITHOUT
WRITTEN CONSENT OF DIVERSIFIED WOODCRAFTS, INC. ANY
REPRODUCTION IN PART OR WHOLE WITHOUT WRITTEN
CONSENT IS SUBJECT TO LEGAL ACTION.
ALL DIMENSIONS ARE IN INCHES UNLESS
NOTED OTHERWISE
CABINET SQUARENESS
FRACTIONAL VALUES
A32 & A37 SERIES TABLES
AUXILIARY WORKBENCH
ASSEMBLY INSTRUCTIONS
REV A
11 OF 13
NTS
EMK
9/11/14
NOTE:
1.
EMK
9/11/14
CREATED ASSEMBLY INSTRUCTIONS
A
-
STEP 8:
ATTACH ONE BRACKET 0.50" FROM THE BOTTOM EDGE OF
STRETCHER AND ONE BRACKET 0.50" FROM TOP EDGE OF
STRETCHER.
PRE-DRILL HOLES IN STRETCHER WITH A
1
8
" BIT AND ATTACH
WITH #8
3
4
" SCREWS.
GO BACK TO STEP 3 AND 4 AND TIGHTEN THE HANGER
BOLTS FOR EACH LEG USING
1
2
" WRENCH OR
1
2
" SOCKET
AND TORQUE WRENCH. TO A MINIMUM OF 12FT LBS BUT
NOT TO EXCEED 17FT LBS.
RIGHT SIDE OF MIDDLE BRACE WITH STRETCHER BRACKET
LEFT SIDE OF MIDDLE BRACE WITH STRETCHER BRACKET
CLOSE UP OF STRETCHER BRACKET ASSEMBLY
BOTTOM SIDE OF TABLE SHOWN
0.50
0.50
BOTTOM EDGE
OF STRETCHER
TOP EDGE OF
STRETCHER
LEG BRACE
LEG BRACE
K:\AutoCAD\Assembly Instructions\A32 & A37 SERIES TABLES.dwg, 8/6/2020 2:26:27 PM, DWG To PDF.pc3
