Diversified Power International Accusense Charge 1-48C017C Series, Инструкция по эксплуатации

Страница: 2 / 14

2
Table of Contents
Section Description Pg Section Description Pg
1 Features 2 7 5-Stage Charge 7
2 Introduction 2 8 L.E.D. Display 9
3 User Safety 3 9 Troubleshooting 9
4 Installation 4 10 Wiring Diagram 12
5 Grounding 5 11 Parts List 12
6 Preparing to Charge 5 12 Warranty 14
Throughout this manual, look for this symbol. It means BE ALERT
– YOUR SAFETY IS INVOLVED. If you do not follow these safety
instructions, personal injury or property damage may occur.
1. Features
•
Fully Automatic - starts and stops charging automatically
•
5 L.E.D. display to easily interpret charge and/or charge error
conditions
•
Many safety features, including Reverse Battery Protection and
Wrong Battery Connections
•
Charge algorithm controls BOTH voltage and current for precise
charging
•
Microprocessor-based control implements an intelligent charge
•
Full, automatic disconnect from AC power after completion of charge
•
After completion of charge, charger will monitor battery voltage levels
2. Introduction
The Diversified Power International (DPI) battery charger is designed to
recharge deep-cycle, lead-acid batteries. It is factory preset to operate in
one of 3 different charge modes; refer to Section 6 for further details.
Its simple method of operation and trouble-free performance makes it
attractive to use. To operate, after the charger is connected to AC power,
simply plug in the DC cord set to activate the unit. The charger then
automatically charges the battery, and also monitors the battery condition
determining the proper charge profile and the correct finish phase before
automatically terminating the charge when the battery is fully charged.
If left connected to the battery and AC power, the charger will disconnect
itself from AC power, but continue to actively monitor the battery voltage.