Dispensing System
www.diversey.com
© 2019 Diversey, Inc. All Rights Reserved. 81125-PSS en (19/260)
J-Fill
®
Portable
Use Overview
J-Fill
®
Portable Dispensing System consistently delivers accurate dilutions anywhere you need them. Simply select the product
you desire, attach the Spill-Tite
TM/MC
cartridge, hook up to a water supply and press the trigger. Dispenses into bottles, buckets and
auto scrubbers. Can be used with the full J-Fill
®
chemical offering.
Safe handling
Please make sure your employees read and understand the product label and Safety Data Sheet before using this product. The label contains
directions for use; and both the label and SDS contain hazard warnings, precautionary statements and first aid procedures. SDS are available
online at www.diversey.com or by calling 888.352.2249. Improper use or dilution may result in damage to surfaces and may result in health
and physical hazards that match those of the concentrate.
Technical data
J-Fill
®
Portable
Unit Dimensions
Weight: 3 lbs. (11.4 kg)
Water Supply Hose
5 ft. (1.5 m)
Operating Range Requirements
Water Pressure: 25–85 psi (170–580 KPA)
Water Flow: 2.5 gal./min. (9.46 L /min.)
Water Temperature: 40–120° F (4–49° C)
ASSE 1055-B backflow prevention requirements.
Product
Description
Product code
J-Fill
®
Portable
J-Fill
®
Dispensing System
D5615573
Fills automatic scrubbers, buckets and
bottles quickly and easily
Water supply hose quick-
connects to almost any
water source
Dispensing Product Instructions
• Attach J-Fill
®
Portable Dispensing System to any J-Fill
®
container and lock into place.
• Connect dispenser using quick-connect to water
supply hose.
• Turn on the water supply.
• For Filling Spray Bottles: Insert the nozzle into spray bottle
and fully depress trigger. Ensure discharge tube is as far
down as possible to limit foaming.
• For Filling Buckets or Auto Scrubbers: Insert the nozzle in
the receptacle and press the trigger. If desired, the J-Fill
®
dispenser can be hung on the lip of the receptacle.
• Optional – Lockable Trigger Button for Hands-Free Filling:
To lock, press down, push in the trigger lock button. To
release, press down on trigger.
• If desired, J-Fill
®
dispenser can be rinsed between cartridge
changes. Simply remove the cartridge and hold the unit over
a sink or drain. Press the trigger for 5–10 seconds to flush
dispensing head.
