COM-S01 Two Channel Model Surface Unit
14
The Two Channel Model has the following controls and connectors:
Surface to Diver
Push To Talk
Button
Channel
Select
Switch
CH
2
/
CH
1
MICROPHONE
MICROPHONE
ALTERNATE SIDE
LINE OUT
Power and
Earphone
Volume
Control
Speaker
Jack
Transducer
Jack
Power ON and Volume Control
Power up the DIVELINK by turning clockwise the Power and Earphone
Volume Control. Select the desired channel with the Channel Select Switch
to match another DIVELINK that you want to communicate with. To
conserve battery power and operating time it would be best to wait until the
diver is in the water before turning
ON
the DIVELINK. Adjust the volume
control to suit your hearing. The DIVELINK has an automatic squelch circuit
to eliminate background noise, so bear in mind that you may not hear much
sound until a diver speaks into another DIVELINK.
