Dittel FSG 2T PS, Руководство оператора

Страница: 33 / 57

FSG 2T PS
Portable VHF/AM Airband Transceiver
May 2010 DITTEL – D10077
33
4.9.2 Programming while in the
CHANNEL MODE:
IMPORTANT!
While in the
CHANNEL MODE
only pre-programmed Channel
Numbers with its corresponding frequencies can be stored in
other memory locations!
Example:
Turn the F/CH knob
6
to change the underscored Channel
Number to the desired Channel Number to be stored in another
memory location.
Press the STO button
3
once to initialize storing.
Release the STO button
3
. A flashing " CH " is shown. The active
Channel Number and its frequency is now ready within 1 minute
to be stored in any of the other 19 memory channels.
Turn the F/CH knob
6
to select the desired memory location.
Press and hold the
STO
button 3
for at least 1 second. The flashing
" CH " should change to steady " St " and the underscore disappears
indicating that it has been stored into the new memory successfully.
Release the
STO
button and the radio returns to
CHANNEL MODE
.
The stored Channel Number is now the active Channel Number
with its corresponding frequency.