DITECH DT5649, Инструкция по эксплуатации

Страница: 28 / 44

28
ENG
DEUDEU
Device overview
ENG
The adaptors for different switch series allow a cost-saving exchange of
switches made by popular manufacturers against an intelligent DITECH
Smart Home iL installation. Installation efforts are kept to a minimum be-
cause components of the already existing or scheduled switch series and
cables can be used. The design resp. the colours and surfaces of already
installed switch series remains unchanged, because existing frames and
rockers can be continued to be used.
Communication with other components is performed via the Homematic
(HmIP) radio protocol. Radio transmission is realised on a non-exclusive
transmission path; thus, interference cannot be completely excluded. In-
terference can be caused e. g. by switching processes, electric motors or
defective electric appliances.
The range inside buildings can be strongly different from the
range in open air.
4 Device overview
(see fig. 2 page 3)
(A)
System key
(B) Connection terminal for phase (L)
(C) Connection terminal for corresponding supply lines
Normally Closed (1)