DITA SAKURA 71, Руководство пользователя, Страница: 6 / 25

11 10
TO CHANGE A CONNECTOR TYPE
1. Grasp the body of the plug firmly with one hand and pinch the
knurled ring with the other.
2. With the plug facing you, firmly twist the knurled ring counter-
clockwise to unscrew it.
3. The knurled ring should fall into position once it has been
completely unscrewed.
4. Pull out the plug.
TO INSERT A DIFFERENT TYPE OF PLUG
1. Gently position the plug to the body while aligning the slot on the
plug with the locating notch.
2. Apply gentle pressure on the top of the plug to ensure the slot,
notch and four-pole connectors firmly attached.
3. To position the threads correctly, move the knurled ring into
position. While gently pushing the knurled ring against the screw
threads, turn the ring counter-clockwise until you feel a slight snap.
4. Holding it in the above position, turn the knurled ring clockwise to
tighten it.
5. Do not use tools such as pliers to loosen or to tighten the knurled
ring. It is designed for finger pressure only.
KNURLED LOCKING RING
LOCATING PIN
UNLOCK
LOCK
LOCATING GROOVE