28
Operating instructions
Operating instructions
29
Charging mode LED/tone
Connect to the
charging lead
Signal tone,
red LED lights up once
Connected to the
charging lead
The red LED flashes during
the charging process and
disappears when the charg-
ing process is complete
(flashing rhythm once a
second)
Mode
LED/tone
Battery low
Red LED flashes every
30 secs., signal tone
Subscribed,
registered
Green LED flashes once
every 10 secs.
Subscribed, out-
side the range/
no base station
Red LED flashes every
second
DECT
connection
Green LED lights up
Alarm
Red LED flashes quickly
Incoming call
Green LED flashes,
signal tone once
Range (limit)
Red LED flashes quickly,
signal tone
EN
EN
Wearing options
The
disty
Notruf
NEO
can be worn on the
body in three different ways:
Option 1:
Attachment the
disty
Notruf
NEO
to the wrist
The wrist strap is pre-assembled in the
factory. The
disty
Notruf
NEO
should be
attached to the wrist so that the charging
socket faces the body. The shorter end of
the strap should be pulled through the
opening of the other half of the strap and
tightened against the wrist. Both pins on
the closure must be pressed into the
opposing holes and clicked into place.
In case of disassembly, from the outside
of the hole, press with a pin or paper clip
on the spring bolt so that this is pressed
together and can be removed from the
hole. If the length and closing mechanism
of the pre-assembled armband are not
appropriate, you can replace it with the
second armband provided.
