Distek, Inc.
Service Note:
2500x-1090
Page 5 of 6
121 North Center Drive
North Brunswick, NJ 08902 USA
P: 732-422-7585 F: 732-422-7310 TOLL FREE: 888-234-7835
This document contains confidential and proprietary information which is not to be disclosed to others for any purpose nor used for manufacturing
purposed with written permission from Distek, Inc.
Service Note
Step 10
Once the spindle sleeve is reinserted, check that the drive belt goes around each pulley as
shown.
Step 10
Step 11
Position the bottom pulley so that it lines up with motor pulley and the drive belt is horizontally
level between pulleys. Secure the pulley in place by tightening the two set screws.
Step 11
Be sure that the set
screws on the pulley are
lined up with the two
flats on the spindle
sleeve as shown.
