DiSS KE-8000MX, Руководство по обслуживанию

Страница: 16 / 30

13
4. IR Remote Controller
The function buttons of the IR Remote Controller are as below.
No. Functions
1 Power Button
2 ID Selection Button
3 Numeric Button
4 PTZ Button
5 Preset Button on PTZ Mode
6 Focus Button on PTZ Mode
7 Zoom (In & out) Button on PTZ Mode
8 Preset Tour Button on PTZ Mode
9 Direction Button (Left/Right/Up/Down)
10 Enter (Selection) Button
11 Menu Button
12 Return Button
Playback Button on Search Mode
13
(Fast Backward/Playback/Stop/Fast Forward)
14 Search Button
15 Instant (Emergency) Recording Button
16 Auto-Sequence Button on Live Display Mode
17 Screen Mode Button
18 Backup Button
15
16
17
14
13
7
4
8
2 1
5
3
11
9
6
10
12
18
Note To use the IR Remote Controller, set the initial ID to be same as the ID in the DVR in the menu of ;
SYSTEM > SYSTEM INFO > REMOTE ID.
All DVR(s) have same default ID when it is out from the factory. Therefore, when the default value is used, one
IR Remote Controller can control several DVR(s) at once. To prevent this, it is recommended to set each
different ID for each DVR.
Procedure How to setup the ID in IR remote Controller
1) Keep pressing ID selection button for about 5 seconds.
2) Set the ID number by pressing numeric button on IR Remote Controller.
- If you want to set one-digit number (up to 9), press “0” first and then the number you want.
- If you want to set two-digit number (10 and over), press “10+” first and then the number you want.