2
PARTS LIST REQUIRED TOOLS
PART
QUANTITY
A: Floor-Mounted Hardware .............................................................................. 4
B: Single Shelf Mount ........................................................................................ 16
C: Double Shelf Mount .........................................................................[Optional]
D: Ceiling-Mounted Hardware ..........................................................................4
E: Wire .................................................................................................................. 1
F: Glass Shelf ........................................................................................................4
Multiple configurations available. Parts may vary.
If you have any questions regarding our products, please visit us at www.displays2go.com or
contact Displays2go customer service at 844-221-3388.
Scan QR code
to visit product
page
A
B
C
D
A
D
A
D
A
D
A
D
A
D
A
D
B
B
B
B
C
C
1
2) Insert and secure the anchor into the drilled holes.
3) Unscrew the Part A, take out the cone part, and fix it on the top with screws, as shown below.
4) Loosen allen keys on Part 2 (shown), then, feed the wire rope so it goes through the 1-3 accessories as shown below.
5) Feed the steel wire through second hole in the collar, according to the arrow in Figure 1. The wire head should be level
with the collar, not protruding. Then, pull the wire rope back as shown by the arrow in Figure 2. to ensure the wire loop
is small. After the wire loop is minimized, use the pliers to crimp the aluminum parts in order to secure the wire loop as
shown in Figure 3.
6) Slide the round copper with spring to the top as shown in Figure 1, then use the allen wrench to tighter the two screws
on brass buckle as shown in Figure 2. to prevent slippage.
Weight capacity A+D=Max.10kgs;
TOOLS REQUIRED:
Drill
Measuring Tape
Pliers
Weight capacity B=Max.5kgs;
Weight capacity C=Max.5kgs;
F
F
F
F
Tape
Measure
Allen Wrench
3mm (lg) & 2mm (sm)
Cordless Drill
3/16”
Drill Bit