Instruction of the RGB remote control
1. This product is equipped with a RGB remote control.
2. Before use, remove the insulating paper from the battery compartment on the back of the remote control so that the remote
control can be powered on.
3. Point the remote control at the podium within the acceptance range and press the corresponding function button on the
remote control to complete the operation according to actual needs.
Loo p Play
•
M6
Mode
Shortcut Key
e e e
@
---O_N_/O_FF
Speed+/Speed-
Color
Shortcut Ke
Notes:
e
8
I
GXv
l
--Br_ig_ht/
-
Remote:
• Working Voltage:
3V (battery CR2032)
•
•
•
•
•
•
•
•
•
•
•
•
•
•
• Working Frequency: 433.92MHz
• Working Temp.:
• Dimensions:
• Weight(N.W.):
LTECI-I
-30
°
C~55
°
C
L104xWS8xH9(mm)
42g
• The RGB LED lights of this product can be set as static/dynamic
mode, single-color or multi-color mode.
•
The brightness and fade-in and fade-out effects can be adjusted
with remote control.
Cleaning instruction
Issue
Cleaning Instruction
a. If only dust on the acrylic sheet, just use a soft cotton cloth dipped in 1 % soapy water and gently
wipe it.
With dust
b. If the dust may contain hard objects, it is recommended to wipe the hard objects gently and then
wipe with a soft cotton cloth. Please remember to wipe with a soft cloth otherwise, the surface is
easily scratched.
For dirt that is difficult to remove, such as oil layer, it is recommended to wipe it with warm water with
Oil layer
a neutral detergent. Since acrylic will chemically react with organic solvents, cracks will occur after
the acrylic is corroded. Please confirm that the neutral detergent does not contain organic solvents
before using it.
If the acrylic is glued to the all-purpose glue, you can use banana water or 10% alcohol to gently wipe
Glue
it repeatedly, or you can use a hair dryer to blow on the part with the all-purpose glue for a while. After
the glue is soft, tear it off and use a soft cloth. Wipe clean gently.
If you have any questions regarding our products, please visit us at www.displays2go.com or contact D2G customer service at 844-221-3388.
Scan
Q
R code to visit product page