5
/
26
⚫
Do not let children climb onto the Digital Signage.
⚫
Keep the small parts away from children to prevent them from swallowing.
⚫
If the Digital Signage won’t be used for a long time, please turn it off and pull out the power plug.
⚫
To adjust the position of the Digital Signage, please disconnect all power cords and move slowly to
avoid tip over.
⚫
Do not scratch or knock the LCD with hard object, or twist and squeeze the LCD.
⚫
Do not turn on the unit immediately when it is moved from a place with low temperature to high
temperature, or else it will cause condensation and malfunction.
⚫
Before cleaning the Digital Signage, please pull out the power plug; wipe with soft cloth; do not use
industrial chemicals; prevent foreign matters from entering the machine. Improper cleaning (such as
cleaning solution, water) may damage the product, erase the printed information, and even cause
damage of the components if fluid flows in, resulting in machine failure.
⚫
If the unit displays the same screen for a long time or the moving picture has fixed text or icon, it will
leave ghosting on the screen and won’t disappear when the unit is turned off; it is normal and isn’t
covered by the warranty.
⚫
The power of the Digital Signage can be cut off by pulling out the plug.
⚫
If the LCD screen ruptures and the liquid splashes on the skin, please rinse for 15 minutes with clean
water immediately, and consult your doctor.
⚫
To carry the Digital Signage with hands, please grab and hold the edges; do not apply pressure on the
panel.
⚫
Use the Digital Signage properly: Use in proper lighting conditions; insufficient lighting or long time
watching will impair your eyesight.
⚫
Unplug device to disconnect from power.
⚫
Insert the plug into the outlet properly, or else it may cause sparks and fire.
⚫
The technical specifications printed herein and on the packaging are subject to change without prior
notice. The Manual may be slightly different from actual operation, and the latter is applicable.
Assembly and Connection
Packing List
Name
Quantity
Digital Signage
1
Remote Control
1
Hardware Kit
Wrench (6mm)
M8*80 Screws (4)
1
Name
Quantity
Operation Manual
1
Cleaning Kit
Towel
Glove
1
Cable Management Unit
1
Touch Pens
2
Note: ADDITIONAL TOOLS REQUIRED FOR ASSEMBLY OF WALL
-
MOUNTED UNIT. TWO PEOPLE REQUIRED.
Contact Displays2Go if you have questions about the operation, debugging and connection of the unit; if the unit doesn’t work
normally, please cut off the power immediately and consult the dealer. The unit is class
-
A product, which may cause radio
interference in living environment. In this case, please take feasible measures, and use power plug as the disconnection device.
CAUTION
