STEP 1
PLACE TABLE TOP ON FLAT SURFACE WITH BOTTOM FACING UP.
SLIDE
JOINER STRIP INTO SIDE OF TABLE TOP THAT HAS A RECESSED GROOVE
(SEE FIGURE 1).
FOLLOW THIS STEP AGAIN INSERTING THE
TABLE TOP EXTENDER INTO THE OTHER HALF
OF THE JOINER STRIP THAT WAS INSERTED
INTO THE TABLE TOP. IT SHOULD NOW BE
ONE COMPLETE SECTION.
TABLE TOP
JOINER STRIP
FIGURE 1
TABLE TOP
(BOTTOM VIEW)
JOINER
STRIP
TABLE TOP
EXTENDER
RECESSED GROOVE EDGE
RECESSED GROOVE EDGE
PAGE 4 OF 9
ASSEMBLY INSTRUCTIONS MANUAL
BLKDMPTB WHITE FOLDING DUMP TABLE
