You must determine which is the correct baffle for your
particular cup size. Refer to the diagram shown to the
right for baffle sizing guidelines. The appropriate baffle
should be selected based on a measurement of the
cup’s outside rim diameter.
For certain foam cups a
larger than normal baffle size may be required.
SECTION TWO - BAFFLE SELECTION & INSTALLATION
1
2
3
4
Install the appropriate baffle onto the cover ring by
lining up the posts in the ring with the holes in the
baffle. Make sure that the baffle is completely flush
with the underside of the ring and that it is inserted
underneath the three retention tabs.
5
Reinstall the cover ring onto the dispenser and rotate
the ring clockwise to secure.
Insert a full sleeve of cups into the dispenser to test
if the baffle is the proper size for your cups. If you
are not satisfied with the dispensing action a baffle
change may be required.
Questions? Call (847) 753-9595, ext. 25 8:00 AM - 5:00 PM CST
Diversified Metal Products, Inc.
2205 Carlson Drive • Northbrook, IL 60062 • (847) 753-9595 • fax (847) 753-9648
www.dispense-rite.com • [email protected]
Rotate the cover ring counterclockwise and remove
from the dispenser. Remove the cardboard spacer
insert and discard. Behind the cardboard spacer you
will find a baffle kit with four sizes of silicone rubber
inserts.
SLR-2F-CSD Baffle Kit (select one)
2 Notches for Medium (MD) Baffle
3 Notches for Large (LG) Baffle
4 Notches for Extra Large (XL) Baffle
5 Notches for Extra Large Foam (XL-F) Baffle
Medium Baffle (2 notches)
Cup Rim Diameters: 3 3/8” - 3 3/4”
Approx. Cup Sizes: 16 - 24 oz.
Part Number: SLRB-2MD
Large Baffle (3 notches)
Cup Rim Diameters: 3 3/4” - 4 1/4”
Approx. Cup Sizes: 24 - 32 oz.
Part Number: SLRB-2LG
Extra Large Baffle (4 notches)
Cup Rim Diameters: 4 1/4” - 4 1/2”
Approx. Cup Sizes: 32 - 44 oz.
Part Number: SLRB-2XL
Extra Large Foam Baffle (5 notches)
Cup Rim Diameters: 4 3/8” - 4 5/8”
Approx. Cup Sizes: 44 oz.
Part Number: SLRB-2XL-F
2-7/8”
3-1/4”
4-1/16”
3-11/16”
