7
BatterY recharGinG
note: Adult operation needed.
Connect the watch to a computer with the included micro USB cable to
charge the battery.
• Make sure that the MAStER PoWER SWitCh is set to the oN
position before recharging.
• Pull up the rubber cover of the micro USB port on the side of your
watch.
• Insert the micro USB cable (small end) into the micro USB port of the
watch.
• Insert the larger end of the micro USB cable into a USB port on your
computer. A USB port is usually marked with this symbol
.
• Once the connection is successful, you will see the battery recharging
symbol displayed on the watch screen.
• Check the charging progress regularly throughout recharging.
• When the battery is fully charged, a message will display on the
screen, indicating that the battery is fully charged. the message will
disappear after a short period of time. You may then disconnect the
watch from your computer.
note: it will take approximately 3 hours to fully charge the battery.
the actual charging time depends on the power supply, the remaining
charge and the ambient temperature of the charging environment. the
optimum ambient temperature is 0° - 40°C (32° - 104°F). If your watch
needs longer than 3 hours to fully charge, please try charging from a
different USB power source.
BatterY LiFe
the time the battery lasts between charges depends on play. Like other
electronic devices, more frequent usage will drain the battery faster.
Some activities will be more demanding on the battery, such as taking
photos and videos.
Battery life estimates for reference
usage
Battery Life
Low Usage
2 weeks
Average Usage
2-3 days
heavy Usage
1 day
note: the above battery life estimations are based on the screen display
being set to oFF when not in use.
