Disney Sing It: Pop Hits Manual
(PLAYSTATION®3)
2
Getting Started
Starting a game
: Before use, carefully read the instructions supplied with the
PLAYSTATION®3 computer entertainment system. The documentation contains
information on setting up and using your system as well as important safety information.
Check that the MAIN POWER switch (located on the system rear) is turned on. Insert
the Disney Sing It: Pop Hits disc with the label facing up into the disc slot. Select the
icon for the software title under [Game] in the PLAYSTATION®
3 system’s home menu,
and then press the S button. Refer to this manual for information on using the software.
Quitting a game
: During gameplay, press and hold down the PS button on the wireless
controller for at least 2 second
s. Then select ―Quit Game‖ from the screen that is
displayed.
Hint
: To remove a disc, touch the eject button after quitting the game.
Saved data for PLAYSTATION®3 format software
Saved data for PLAYSTATION®
3 format software is saved on the system’s hard disk.
The data is displayed under ―Saved Game Utility‖ in the Game menu.
Compatible Logitech microphone models:
A-0234A
C-U0002
E-UR20
Controls
Your microphone must be plugged in at all times while playing the game. Some
multiplayer options become available only when two microphones are connected.
Choose Mic Volume from the Options menu to adjust volume levels for each
microphone.
Disney Sing It: Pop Hits
can be used with either the SingStar®
microphone(s) or the Logitech USB microphone(s). If both are used at the same time,
only the SingStar® microphone will be recognized.
