3
Charging the Battery
Important!
Before using the Princess Scooter for the first time the
battery needs to be charged for a full twelve hours. Only an adult who
has read and understands the following safety warnings should handle,
charge or recharge of the battery.
1.
Remove the
seat,
as described on page 10.
2.
Disconnect the
red connectors
.
3.
Plug the
charger connector
into the
red connector
from the battery.
Only use the Kid Trax Toys charger included with the Scooter (Input:
AC 118V–, 0.5A, 60Hz Output: DC 6V, 0.6A).
4.
Plug the
charger
into a standard 118V wall outlet.
Note:
The charger may feel warm during charging. This is normal and
not a cause for concern.
5.
After charging is complete (at least 12 hours, but no more than 18)
unplug the charger from the wall outlet.
6.
Unplug the
charger
from the
charging connector
and connect the
battery connectors
.
7
. Place the
seat
back on the vehicle, and lock into place.
charger
battery
12
red battery
connector
