It is important to keep the unit as dry and clean as possible. You
may clean the cabinet with a cloth or sponge moistened with mild
soap and water. Do not attempt to use strong cleansers or solvents,
as they may cause damage.
Maintenance
MODEL: MM-122
INSTRUCTION MANUAL
SIZE: 357W x 201Hmm
DATE: Jul 2, 2013
MATERIAL:100gsm White paper
PRINTING PURPLE (PMS 265C), 1C+1C
Slide the
Power & Demo Switch
to turn the unit to demo, off or
on. To save battery life, the unit will power off after a brief time if no
button is pressed.
Power & Demo Switch
Installing/Replacing the Batteries
This unit comes with 3 AA batteries already installed. These are for
in-store demonstration purposes only and should be replaced when
you get the toy home. If the sound becomes weak, distorted or the
unit does not function properly, the batteries should be replaced.
1. Using a Phillips screwdriver, open the battery compartment door
located on the bottom of the unit.
2. Insert 3 new AA (R6) batteries in the battery compartment. Make
sure batteries match the + and – as indicated in the battery
compartment diagram.
3. Replace battery compartment door. Do not overtighten screw.
WARNING : DO NOT THROW BATTERIES AWAY WITH
HOUSEHOLD TRASH. PLEASE CONSULT LOCAL
REGULATIONS FOR PROPER BATTERY DISPOSAL.
For the Best Possible Performance
• We recommend the use of alkaline batteries for longer life.
• Do not mix old and new batteries.
• Do not mix alkaline, standard (carbon-zinc) or rechargeable
(nickel-cadmium) batteries.
• Batteries are to be inserted with correct polarity.
• Remove exhausted batteries from the unit.
• Do not attempt to recharge non-rechargeable batteries.
• The supply terminals are not to be short-circuited.
• Batteries should be removed if the item will not be used for an
extended period of time, such as a month or longer, to prevent
battery leakage or damage.
• Rechargeable batteries should only be charged under adult
supervision.
• Only batteries of the same or equivalent type recommended are
to be used.
There is a fun built-in Minnie Mouse song to dance along with!
Press the
Song Button
to hear it.
Listening to a Song
Sing along to your own music from an MP3 player, CD player, etc
by using the MP3 Mode.
1. Find the MP3 Line-In Cord located on the back of the unit.
2. Connect the MP3 Line-In Cord to your audio device’s
headphone or line-out jack.
3. Press the
MP3 Button
inside the jewelry box and then
press the Play Button on your audio device.
4. Adjust the Volume on your audio device to your desired level.
Please keep in mind that the jewelry box will automatically turn off
in 7.5 minutes to save power. To re-engage MP3 Mode once the
power turns off, press the
MP3 Button
again .
Playing Your MP3 Music (MP3 Mode)
About Your Toy
Store all your favorite jewelry in this adorable music box made just
for little girls! Watch Minnie dance along to the built-in music, or
connect your MP3 player to hear tunes from your own collection.
Song Button
Press to hear a built-in song!
MP3 Button
Press to hear music playing
from a connected MP3 player
or other audio device.
Power & Demo Switch
Slide switch to turn unit to
Demo/Off/On.
AUX Line-in
Cable
Back View
Battery Installation
