1. Ensure that the Traction Belt is completely deflated. If there should be some air left,
remove air by rotating the Air Release Screw counterclockwise. Then rotate the Air
Release Screw clockwise before air injection.
2. Attach the one face of the Belt Adhesive Side to the one face of the Support Adhesive Side.
(Air Injection Nozzle should face down)
3. Put your chin on the Chin Pad of the Neck Support.
(You are recommended to put a handkerchief or towel on the Chin Pad to absorb perspiration)
4. Attach the other face of the Belt Adhesive Side to the other face of the Support Adhesive Side.
(It looks like wearing Disk Dr. for Neck around your neck.)
5. Confirm whether the Air Release Screw of the Air Injection nozzle is tight and then link
the Air Injection Tongs with the Air Release Screw like the picture.
(Let the Air Release Screw come in touch with the Air Injection Tongs precisely)
6. Grab the head of the Pump with one hand and the Pump Handle with the other hand.
Then, push and pull the Pump Handle repeatedly to inflate the Traction Belt .
7. As air is injected, the Traction Belt will expand upward and downward.
You will feel tightening around your neck.
8. By pushing the Air Injection Tongs, remove it from the Air Injection Nozzle.
(You can hear a little bit of the air discharging sound at the time of removing the Air
Injection Tongs.)
9. To unbind the Traction Belt, be sure to release air where the Traction Belt is around your neck,
so that it may not be rolled up. To release air, rotate the Air Release Screw slightly
counterclockwise.
(You can also release air by depressing the pin in the center of the Air Release Screw.)
Содержание NG20-M
Страница 1: ......