6
Goto X: goto the position calculated from the local and satellite positions.
Add satellites: Press Red to add a new
satellite, in which you must input an unique
longitude, and edit the satellite's name with
soft keyboard.
Edit satellites: Press Green to edit the
focused satellite.
Delete satellite: Press Yellow to delete the
focused satellite. Press OK to confirm.
Single Satellite Scan: Press Blue to pop the
menu of scanning settings.
Scan Mode: Press Left/Right to select
default, which scan the default
transponders built in, Blind Scan and
NetWork, which scan with NIT on.
Crytped: Press Left/Right to select All
Channels or FTA Channels;
Service Type: Press Left/Right to select
ALL , DTV or Radio.
Press OK to start scanning with the above
settings.
Multi-Satellites Scan: Press OK to select satellites with the mark"
“,then press
blue to pop the menu of scanning setting. After Configuring like single satellite scan,
press OK to start multi-satellites scan.
Channel Search
Scan the satellites or Transponders according the configurations.
Blind Scan
First scan the band to get the transponders which can be locked. After gathering
all Transponders, Scan the transponders one by one to get the programs.
4.3.2 Transponder
Press GOTO to switch the list to show transponders of the focused satellite. Also
you can press GOTO to switch back to satellites' list.
Add transponder: Press Red to add a new transponder. It can't save an existing
TP under the same satellite.
Edit transponder: Press Green to edit the focused transponder. It can't save an
existing TP under the same satellite.
Delete transponder: Press Yellow to delete the focused transponder. Press OK
