Dish TV S9000, Руководство по эксплуатации

Страница: 4 / 20

FRO N T PA N EL
R EA R PA N EL
2
1. key standby. To instruct the receiver to the standby state or the normal state when the power is being
inserted
2. LED-displaying board/ status indicator/ remote sensor
3. 4. channel turning/ cursor movement
5. 6. volume adjustment/ parameter adjustment
7. The lid, to uncover it to show the card slot which is used to be inserted a card. Make the side of card with
metal slice downwards when inserting the card
1. plughole, infrared line. To insert the inserting terminal of infrared line with a sensor into this hole. If so, you can
remote the receiver either by the local or by the infrared sensor
2. interface ASC. To exchange data with the outer
3. 4. terminals of audio signal output. right/ left. To be linked with a TV set or an audio amplifier
5. terminal, video signal outout. To be linked with the video terminal on a TV set
6. interface, TV SCART. To couple this with which on a TV set. This interface owns both the audio and the
video signals the same time
7. terminal, satellite signal loop out. To link with another receiver to form the loop connection
8. terminal, satellite signal input. To link with the terminal that comes from the satellite antenna
9. plughole, power inserting. to be inserted with the terminal of DC power that comes from the adaptor