Dish TV PEA200, Руководство пользователя

Страница: 4 / 15

DishTV PEA200
www.dishtv.co.nz
2.2 Introduction to the Interface and Buttons
Figure 2-2 Schematic Diagram of the Interface/Buttons
RJ45 port : one 10/100Mbps port which is used to connect with network devices
，
see the LAN status
indicator for the operating status of the port.
RESET button : restore the factory settings.
Pair button : the button to build the network. Press the Pair button for 2-3 seconds within 2 minutes to
establish connection between two devices and a private network. If you press the Pair button on the
device for over 10 seconds, the device will exit the original network automatically and establish a random
private network. For more information about function applications of Pair button, see the Application of
the Pair Button in Chapter 5.
2.3 Application
In order to access t
he
LAN through the power line, the computer device needs to be connected
through network wires and Ethernet adapter (the adapter needs to be compatible). To install the power
line network according to the following steps:
1. Install the first power line adapter

Connect the adapter’s RJ45 port to the family network interface, such as the router’s LAN port.

Insert the adapter to the supply hub.
Figure 2-3 Schematic diagram for network connection
Internet
Power socket
电源插口
Connect the
network wires to
the
network
equipment port
connect one port of
the network wires
to the RJ45 port of
Adapter 1
Insert Adapter 1 to
the power socket
Insert Adapter
2 to the power
socket Insert the port of
the network wires
to the RJ45 port of
Adapter 2 Connect the other
port
to the
computer’s
internet access
Power socket