Dish TV aerialBox-DVD T5050, Руководство пользователя

Страница: 28 / 31

28
1.2 DVD Menu Options
To enhance your DVD viewing experience the UNIT has separate settings for the DVD player. To change the
settings enter DVD mode (if you are in TV mode, press the DVD button on the remote) then press the setup button
to enter the menu. The following is a list of menu options and their available functions.
When you first enter the menu you will be presented with six options. Use the arrow keys on the remote control to
navigate through the menu options:
General

TV SYSTEM: Set the type of input your TV requires. NTSC, PAL60, PAL or Auto.

AUTO PLAY: On/ Off. Set the DVD to play automatically.

VIDEO: Setup the output from the player. There are different types of output: CVBS, INTERLACE-YUV, and
P-SCAN YpYbPr.

RESOLUTION: Setup the output resolution: 480p/ 576p/ 720p/ 1080i/ 1080p.

TV TYPE: Set the screen output type: 4:3PS/ 4:3LB/ 16:9. Some TVs are unable to display wide screen
pictures without cutting the ends off. To prevent this, change this setting to PS or LB. If your TV supports a 16:9
aspect ratio use the 16:9 setting.

PASSWORD mode: Set a password for rated content. The default code is
“1234”.

RATING: Set a rating level that can be viewed without a password. There are 8 levels: from Kid Safe to Adults
only.

DEFAULT: Restore all options back to the defaults factory settings.
Language Setup

OSD language: Change the On Screen Display language.

Audio: Select default audio language

Subtitle: Select default subtitle language.

Menu LANG: Set menu language
Audio Setup

AUDIO OUT: Setup the audio output, select PCM, RAW or off.

KEY: Set up the key of audio output.