Chapter 1
Introduction
Tip: The receiver
features let you
record programs
without using a
VCR!
This is important: If
you don
’
t tune to a
program until after it
starts, you can
record only the part
of the program that
comes after you tune
to it.
15. Select
OK
to start recording the program. Notice the receiver
’
s front
panel
RECORDING
light turns on.
16. If you want, press the
STOP
button. This stops the receiver
from recording the program.
Notice the receiver
’
s front panel
RECORDING
light turns
off.
17. Now, if you want to take the time, use the
Program Guide
to find
another program set to start in the next few minutes.
Note
: Start watching the program when it starts. Watch the program for a
few minutes.
18. Press the
BACK
button to reverse the program.
Note
: Let the program reverse all the way to its start.
19. Press the
RECORD
button. The receiver stores a recording of
all of the program broadcast so far, and keeps on recording the
program. You can record all of the program, even though you
didn
’
t start recording until after the program started.
Note
: The
receiver can hold up to about an hour of
programming. If you are watching a program (for example, a football
game) and start recording after about an hour into the program, the
receiver will not record the entire program.
20. Press the
DVR
button. This opens the
DVR Events
menu on
the TV screen.
Note
: Even though the button on your remote control may be
marked DVR or PVR, the remote control works the same way.
Page 15
