THREE ORBITAL LOCATIONS
DISH 500
DISH 500
Three Orbital Locations, up to 4 Tuners
(1) DP Twin on a DISH 500
(or two DP Dual LNBFs)
(1) DP Dual on a DISH 500
with I-Bracket
(1) DP34 Switch
To Receiver
Tuner Inputs
DP SINGLE TUNER
DP PLUS DUAL TUNER
LEGACY TUNER
DISH
500
Three Orbital Locations with a Legacy Receiver
(1) DP Twin on a DISH 500
(1) DP Dual on a DISH 500 with I-Bracket
(1) DP34 Switch
(1) DP Adapter for each Legacy Receiver
DISH 500
DISH 500
Three Orbital Locations, up to 12 Tuners
(1) DP Twin on a DISH 500
(or two DP Dual LNBFs)
(1) DP Dual on a DISH 500
with I-Bracket
Up to (3) DP34 Switches
To Receiver Tuner Inputs
DISH 500
DISH 500
Three Orbital Locations, with DP Plus Twin
(1) DP Plus Twin on a DISH 500
(1) DP Dual on a DISH 500
with I-Bracket
(1) DP Plus Separator
DP PLUS DUAL TUNER
DP SINGLE TUNER
Or Legacy Receiver
DISH 500
DISH 500
Three Orbital Locations, up to 24 Tuners
(1) DP Quad on a DISH 500
(or two DP Dual LNBFs)
(1) DP Dual on a DISH 500
with I-Bracket
Up to (6) DP34 Switches
To Receiver Tuner Inputs
To Receiver Tuner Inputs
DP SINGLE TUNER
DP SINGLE TUNER
Or Legacy Receiver
with an adapter
DISH 500
DISH 500
Three Orbital Locations, up to 2 Tuners
(1) DP Twin on a DISH 500
(1) DP Dual on a DISH 500
with I-Bracket
(2) DP21 Switches
Grounding according to the National Electric Code (NEC) and all local electrical codes is required.
Single Legacy installations are not supported. Installations with
two Legacy receivers cannot view the third orbital location.
Each switch must have a connected receiver to supply power
Each switch must have a connected receiver to supply power
