Dish Network 167821, Руководство пользователя

Страница: 15 / 40

5
S
CANNING FOR
E
QUIPMENT
C
ODES
9
Turn the equipment back
on and try some other
buttons to make sure they
work. If the code works for
other buttons, stop here.
Note : If you have
programmed your remote in
Limited Mode, only the
MUTE
and
VOLUME
buttons work.
For example, sometimes
POWER works when other
buttons don’t.
10
If the code doesn’t work,
repeat steps 3 through 9
with another equipment
code from the tables.
Try every code listed for your
brand until one works for your
equipment.
11
If you can’t find a code that
works, try Scanning for
Equipment Codes that
follows.
Instructions Additional Information
1 Turn the equipment on. Use the equipment’s front panel
buttons or its remote control.
2 Press and hold the mode
button until all the other
mode buttons light up, and
then let go of the button.
The mode button flashes.
For example, hold TV for a TV
until all of the other mode
buttons light. When you let go,
TV
flashes.
3
For
AUX
mode only . Press
0 for a second TV, or 1 for a
second VCR, or 2 for a
tuner, or amplifier. Then
press the
STAR
(*) button.
This step is for programming
which kind of equipment that
should be programmed in
AUX
mode. If you’re not
programming in
AUX
mode,
skip to step 4.
Instructions Additional Information