Part 3
Fig 4
Part 3
The purpose of part three is to lock the frame at a desired height. For the series of instructions
below:
1.
To lock in the desired height, you will need 2 “12 Spring Washer”
, 4 “12-U Bolt”
, 2
“M12*75 Hexagon Bolt”
, and 2 “M12 Nut”
2.
On the bottom half of each of the bases, there is a long slit. To secure the frames height,
take a “M12*75 Hexagon Bolt
, and insert a “12-U Bolt”
into the “M12*75 Hexagon
Bolt”
, then slide them into the slit. On the opposite side of the bolts, place a “12-U
Bolt”
and then a “12 Spring Washer”. Lock this into place by tightening “M12 Nuts”.
3.
Repeat step 1-2 to secure the other post.
M12*75 hexagon bolt 2x
12-U bolt 4x
12 spring washer 2x
M12 nut 2x
Содержание NDALR
Страница 1: ...NDALR 250lbs Aluminum Truck Rack Fig 1...
