6.
Connect installation harness 22-pin plug (See
Fig. 4
) to Module 22-pin
connector (See
Fig. 5
)
Fig. 5
22-pin Molex connector
7.
Set dip switches #
2 & # 8
to
“ON”
(down). All others remain
“OFF” (up)
Fig. 5
8.
Connect dock cable 8-pin pluge (See Fig. 6) to Module. (See
Fig. 5
)
9.
Route 30-pin dock connector to front of dashboard or location or
choice (within 10 ft.)
Fig. 6
30-pin dock connector
Test Operation:
1.
Turn ignition and r
adio “ON”
2.
Press “
CDC
”
button on radio to enter changer/Aux mode
3.
Connect apple device to dock connector
4.
Device should begin charging
5.
Start playback and enjoy tunes on car speakers.
6.
Use radio volume control button to set the playback level.
Playlist and Track selection is *NOT* possible from radio
buttons. Use audio device built-in controls or wireless remote
to access and control audio files and applications.
7.
If correct operation is confirmed, reinstall radio:
To reinstall radio simply remove keys from keyhole, align radio to dash
opening and slide into cavity until it locks in place.
