Fig. 3
Fig. 4
radio connector
3.
Connect adapter harness 10-pin plug (red) to radio chamber
(C)
vacated in step 2
—
See
Fig. 5
Fig. 5
10-pin plug
4.
Connect supplied 3.5mm audio cable (See
Fig. 6
) to input jack on adapter
(See
Fig. 7
). Route the other end to wherever audio device will reside (within
3 ft.)
Fig. 6
audio cable
Operation
1.
Turn ignition and r
adio “ON”
2.
Press "CD” button
on radio
Note
: If radio does not switch to CD, cycle ignition OFF/ON and retry.
3.
Put audio device in play mode. If playback is distorted, lower volume on
device or if inaudible, raise it.
Warning
: Playlist and Track selection is *NOT* possible from radio. Use
the smartphone built-in controls to access and control the audio files.
4.
If correct operation is confirmed go ahead and reinstall radio.
Disclaimer
• This product has no affiliation with
Mercedes
• There are no warranties expressed or implied by purchase of
this product
• We’re not liable for misuse of this product.
©
1995-Sep-21 Discount Car Stereo, Inc. All rights reserved. Information in this document is
subject to change without notice. Other products and companies referred to herein are
trademarks or registered trademarks of their respective companies or mark holders.
