Pairing:
Pairing process varies among devices but basic steps are the same. This process is
done upon initial install and will not have to be repeated each time you enter/exit
vehicle.
1.
Turn Ignition and radio “ON”
2.
On A2DP device: go to
Settings, Wireless & Networks, Bluetooth
Settings
3.
Select
Bluetooth
and turn on.
4.
Then select Bluetooth settings
5.
Tap
Scan for devices
.
6.
Wait for Bluetooth device name to appear (Sky) and select it.
(See
Fig. 4
)
Blue LED inside module glows steady (paired)
Fig. 4
Test Operation:
1.
Turn ignition to “ACC” and radio “ON”
2.
Press “CD-C” button on radio to enter Bluetooth mode.
Radio display will change to default CD changer mode: Disc 6 track 1 as
seen in
Fig. 5
Fig. 5
3.
Launch audio application on Smartphone or Tablet and check that volume
on device is set to 80% or more
4.
Use radio volume control button to set playback level.
Track selection, text display *NOT* possible from
radio. Use audio device built-in controls and
display or purchase optional remote control
5.
If correct operation is confirmed go ahead and reinstall radio.
