Introduction:
Most Bluetooth car kits include a universal harness that may or may not fit the
radio in your vehicle and as a result splicing and/or cutting the vehicles harness
will be required to complete the install. Purchase this installation harness to
quickly install Motorola TK30 and select Parrot MKi Hands-free kits to Becker
radios with optional CD changer
(vehicle MUST HAVE a working CD changer)
.
Installation:
We recommend disconnecting the car battery. But before
anything locate and record the radio safe code
. Don’t
disconnect battery if radio code is not available, otherwise
radio will cease to operate.
1.
Remove radio from dash to gain access to the connectors. A set of
Radio removal tools (See
Fig. 1
) is required.
Fig. 1
Radio removal Tools
Fig. 2
2.
Slide tools into radio slots
(51)
(Straight edge facing away). Withdraw radio
by pulling outwards. To release keys simply press retaining springs. See
for more regarding removal tools.
3.
Disconnect blue (C-3) green (C-2) plugs and yellow (C-1) plugs from radio
cavity (See
Fig. 3
)
Fig. 3
radio connectors
4.
Connect installation harness yellow, green and blue plugs (See
Fig. 4
)
to their respective slots on radio. (Chamber C as seen in
Fig. 3
).
