Introduction:
If your 2003-12 Honda or Acura does not include Bluetooth our A2DIY-HON03
“triple play” upgrades these vehicles to support
(1)
Bluetooth Hands-Free
calling, (2) music streaming from
any smartphone or Tablet with A2DP and HF
profile. In addition to Bluetooth, it includes a 3.5mm
(3)
AUX input jack which
user can connect and play portable audio devices (e.g. Mp3 Players, satellite
radio kit, iPods etc.). The included wireless remote allow user to change tracks,
volume and more while keeping eyes on the radio. An
optional USB charging
port
supplies up to 3A charging power for those power-hungry devices.
Keep
the radio and car you love
while enjoying Bluetooth features only available on
newer cars.
See Frequently Asked question
at the end of this guide for details.
Installation:
(To radio)
Remove radio from dashboard to gain access to connector. (Vehicle
specific radio removal instructions are not part of this guide, but may be
available upon request)
Older 14-pin blue plug radios (See Fig. 2) are
not compatible
.
Compatible radios must have 14-pin white connector as seen in
Fig. 1.
1.
Locate
14-pin white connector
(See
Fig. 1
) (usually on back or bottom
of the radio)
Fig. 1
Radio 14-pin port
Fig. 2
Honda 14-pin plugs
2.
Connect module 14-pin plug (See
Fig. 2
) to radio 14-pin connector.
Note:
separately) is required to retain GPS guidance (prompts)
3.
Connect supplied 3.5mm audio cable (See
Fig. 4
) to module “AUX” jack
(See
Fig. 3
). Route other end to front of the dash or wherever Aux
device will reside (within 3 ft.)- Skip this step if not using the aux jack.
Fig. 3
Module input jacks
