3.
Connect installation harness Blue ISO plug (See
Fig. 4
) into C-3 slot
vacated in step 2
—
proceed to step 4 below.
Installation:
AUDI: Audi radios have a solid 20-pin plug across chambers A-C (See
Fig. 4
)
1.
Disconnect solid 20-pin plug from radio
2.
Connect solid 20-pin plug to installation harness 20-pin connector
(Red)- See
Fig. 5
.
Fig. 4
Fig. 5
3.
Connect installation harness Blue, Green and Yellow ISO plugs (See
Fig.
6
) to radio as seen in
Fig, 3
Fig. 6
4.
Secure black wire to ground or to radio chassis as seen in
Fig. 7
Fig. 7
Ground wire to radio chassis
5.
Secure module and proceed to next section
