8.
Connect module 16-pin plug (See
Fig. 9
) to radio slot vacated in step 6.
9.
Connect single red wire to a
12V Accessory supply
wire in vehicle.
Do
not connect to 12V constant supply (battery)
Tip
:
Accessory (ACC) power is available on SRX ignition harness (found
under steering column). Remove panel under steering column and tap
brown wire coming off the ignition harness. This wire will power the adapter
when ignition is “ON”
.
Pairing
Pairing process varies among devices but basic steps are the same. This
process is done upon initial install and will not have to be repeated
1.
Turn Ignition and navigation r
adio “ON”
LED inside adapter peephole will flash (pairing mode)
2.
On A2DP device (e.g., Smartphone): Go to
Settings, Wireless & Networks,
Bluetooth Settings
3.
Select
Bluetooth
and turn on.
4.
Then select Bluetooth settings
5.
Tap
Scan for devices
.
6.
Wait for the Bluetooth device name to appear and select it. (One of two
devices will display)
LED inside module peephole will glow steady (paired)
Not subscribed to XM radio:
Subscribed to XM radio:
