SUB FUNCTIONS
The Sub Functions provided in the Reflex are designed to allow the user to alter and
enhance the performance of the system according to their needs and applications. In
the main menu, press and hold down the STATUS button for five seconds. The menu will
be switched to the Sub Function menu. To return to the main Function menu and leave
the Sub Function menu, go to the SETUP mode and press and hold down the STATUS
button for five seconds.
Setup
Since there are different settings under the SETUP Sub Function to control the Reflex
operation, we suggest using the original default settings for optimal operation. Changes
should be made only when you are very familiar with its operation.
HDD Partition
This setting selects the current working partition on the internal hard drive. Press
the STATUS button to change the setting and press START to exit. After selecting a
partition, EXIT will bring you back to the COPY function in the main menu.
CD to CD
This setting controls the source location of the master data. Select YES to bypass the
existing hard drive and copy directly from CD to CD. Select NO to copy the CD from the
data stored in the current partition of the internal hard drive. This setting will not be
saved during the reboot of the Reflex. Press the STATUS button to change the setting
and the START button to exit.
Start Writers
This setting controls the number of CD writers that will work in the Reflex. Normally it
should be equal to the number of writers installed in the Reflex. However, the number of
writers set to record can actually be less than the number installed. If seven writers are
installed, for example, a number setting of "2" will allow using only two writers at one
time. The Reflex will start the operation instantly when any two of the seven installed
writers are ready (DISC DETECTED). The other five writers will be idle. Press the STA-
TUS button to change the setting and press the START button to exit.
Write Method
This setting controls the writing methods of the CD-R media INCLUDING DISC AT
ONCE or TRACK AT ONCE. DISC AT ONCE is the default setting. Press the STATUS
button to change the setting and the START button to exit.
Write Speed
This setting controls the maximum writing speed of the CD writers. The default
setting is MAX which will use the highest writing speed of the writers (40X). For
applications requiring a lower write speed, use this setting to adjust to 32X, 24X, 16X,
12X, 8X, 4X, or 2X. Press the STATUS button to change the setting and the START
button to exit.
T
www.discmakers.com
1-888-800-4041
8
