Dirty Pro Tools A388 ELBL, Руководство пользователя

Страница: 7 / 10

Always pull the power plug before making adjustments to the equipment.
Fitting the debris bag
First hang the eyelet on the hook on the suction tube. Then slip the debris bag over the port on the
motor housing. Make sure that there is an audible click when they engage.
Operation
Connecting the equipment to the power supply and switching on
The equipment can be connected to any socket outlet (with 230 V AC) that is equipped with a 10A
fuse or higher. The socket-outlet has to be safeguarded by an earth-leakage circuit breaker (e.l.c.b.).
The operating current must not exceed 30 mA.
Insert the equipment’s plug into the power cable coupling (extension).
Secure the power cable with the strain-relief clip provided on the equipment .
To switch on, push the On/Off switch toward “I”.
To switch off, push the On/Off switch toward “O”.
Selecting the mode of operation
Suctioning
Turn the lever to position A. You can do this both when the equipment is at a standstill and while it is
running.
Blowing
Turn the lever to position B. You can do this both when the equipment is at a standstill and while it is
running.
Channel the air stream forward and walk slowly to blow foliage or garden refuse into a pile or to
clear out hard-to-reach places.
Caution!
Empty the debris bag before blowing. Otherwise, the material that has been vacuumed up could
drop out.