background image

Important Safety Information

WARNING:  

Read and thoroughly understand all instructions 

and safety information before assembling or operating this 

trimmer/mower. Failure to do so may cause serious injury or death. 

Do not allow anyone to operate this trimmer/mower who has not 

read this manual. As with all power equipment, a trimmer/mower 

can be dangerous if assembled or used improperly. Do not operate 

this trimmer/mower if you have doubts or questions concerning 

safe operation. 

Call our customer service department at 

720-287-5182,  

1-877-487-8275, 

 or visit

 

www.dirtyhandtools.com

 if you have any 

questions or concerns about the safe operation of this equipment.

Intended Use

Do Not Use the trimmer/mower for any purpose other than for 

which it was designed. Any other use is unauthorized and may 

result in serious injury or death.

Personal Protective Equipment

When operating this trimmer/mower it is essential that you wear 

safety gear including goggles or safety glasses, adequate clothing 

and tight fitting gloves (no loose cuffs or draw strings). Always 

wear ear plugs or sound deafening headphones to protect against 

hearing loss when operating this trimmer/mower. Always wear 

sturdy footwear. Never wear sandals, sneakers or open shoes, and 

never operate the trimmer/mower with bare feet. Do not wear 

loose clothing that might get caught in moving parts.

Whenever you leave the operating position to make adjustments, 

change cords or if you have to remove grass or debris from

the underside of the deck, always shut off the engine and wait five 

(5) minutes to allow parts to cool. 

Remove the key or disconnect 

the spark plug wire and keep the wire away from the spark plug to 

prevent accidental starting.

4

!

WARNING

!

DANGER

!

CAUTION

Содержание 101085





























Отзывы: