4. Assembly
②
Mounting the handlebar
Loosen the bolt and remove the stem
clamp.
Align the handlebar and install the
stem clamp. Please set the bar a
little toward the rider.
Loosen the clamp bolt, align the
steering wheel and lock it again.
①
Front wheel mounting
Remove brake wire holder and
release the brake.
Attach the front wheels to the forks.
There is no distinction between left
and right. Make sure that the bracket
fits securely into the hole of the fork
and lock it with the nut.
Loosen brake shoe nut, adjust the
brake shoe so that it is in parallel
with the rim, and set the wire to the
holder again.
Installation requires special knowledge and technique. Haphazard installation may
cause accidents or failure.
Be sure to hand over to the customer after assembling
and adjusting at the dealer.
Also, this manual contains descriptions for daily inspection and adjustment,
please
read through with a guardian or adult.
5
