Follow these steps to empty the
dirt canister
(refer to Illustration #1)
Make sure the Power Unit is OFF.
1) Disengage the canister latches
located on opposite sides of the
power unit.
2) Remove the dirt canister.
3) Dispose of canister contents in
trash receptacle.
4) Raise the empty dirt canister to the
proper location under the power
unit and engage the latches.
5) Be certain the dirt canister and
the cyclonic cone seal are
“seated” properly to the body of
the unit.
Follow these steps to replace the
filter cartridge
(refer to Illustration #2)
Make sure the Power Unit is OFF.
1) Unlatch and remove the Dirt
Canister.
2) Remove the cyclonic cone by
pulling down on it. Place cone
in dirt canister.
3) Remove the pleated filter by
turning the filter latch 90
°
(counter-
clockwise) to disengage the filter.
(The filter latch is located at the
bottom of the pleated filter)
4) Insert new pleated filter (p/n
8107-01) and engage filter latch
(by rotating it 90
°
clockwise until
you feel it snap in place).
5) Raise the dirt canister (with cone
inside) to the proper location
under the power unit and engage
the latches.
6) Be certain the dirt canister and
cyclonic cone seal are “seated”
properly to the body of the unit.
ILLUS. #1
Dirt Devil
®
Filtered Cyclonic Twin Motor
MODEL: 1099e
Filter
Cartridge
Filter Latch
(turn 90
°
to
disengage filter)
Dirt Canister
Cyclonic
Cone Seal
Cyclonic Cone
ILLUS. #2
