Dirt Devil Pro Power UD70172 Скачать руководство пользователя страница 17

Страница: 17 / 20

ROU

SHOO

ING

Any other servicing should be done by an authorized service representative. If appliance is not
working as it should, has been dropped, damaged, left outdoors, or dropped into water, take it
to a service center prior to continuing use.

PROBLEM

POSSIBLE CAUSE

POSSIBLE SOLUTION

Vacuum

won’t run

1. Power cord not firmly

plugged into outlet.

1. Plug unit in firmly.

2. No voltage in wall plug.

2. Check fuse or breaker in home.

3. Blown fuse or tripped

breaker.

3. Replace fuse/reset breaker in home.

4. Thermal Protector activated. 4. Unplug and allow vacuum to cool for 30min.

(This willl reset the thermal protector)

Dust escaping

from vacuum

1. Dirt cup full.

1. Empty dirt cup.

2. Dirt cup not installed

correctly.

2. Review Dirt Cup removal & replacement.

3. Hose not installed correctly. 3. Review Hose installation.

4. Rinsable and/ or Filter

made with HEPA media

not installed completely.

4. Review Filter Removal and Cleaning.

Smoky/burning

smell detected

1. Belt broken or stretched.

1. Replace brushroll belt.

2. Brushroll is clogged.

2. Clear/remove debris from brushroll.

Vacuum tools

won’t pick-up

1. Hose clogged

1. Remove hose and tools; remove obstruction.

2. Dirt cup full

2. Empty dirt cup.

3. One or both filters are

clogged.

3. Remove both filters and clean.

4. Vacuum not picking

up debris.

4. Brushroll could be jammed or the belt

could be broken. Also check height adjust setting.

To reduce the risk of personal injury - Unplug before cleaning or servicing.

WARNING

Содержание Pro Power UD70172




















Результаты поиска

Содержание Pro Power UD70172

Отзывы:

Похожие инструкции для Pro Power UD70172

Бренды по названию

Популярные бренды

Dirt Devil Pro Power UD70172, Руководство пользователя

Результаты поиска

Содержание Pro Power UD70172

Отзывы:

Похожие инструкции для Pro Power UD70172

Бренды по названию

Популярные бренды