14
3 Service and maintenance
3.2 Cleaning/replacing the exhaust filter
1.
Switch off the appliance (
).
2.
Pull the plug out of the plug socket.
3.
Release the exhaust filter cover as shown (Fig. 30).
4.
Remove the exhaust filter using the tab provided (Fig. 31).
5.
Tap out the exhaust filter over a dustbin.
6.
Then brush out the exhaust filter with a soft brush, e.g. the furniture
brush included in the scope of delivery (Fig. 32).
7.
Press the exhaust filter back into its console until the removal tab
audibly engages.
8.
Attach the exhaust filter cover at the bottom first (Fig. 33).
9.
Lock the exhaust filter cover (Fig. 34).
3.3 Storage
3.4 Spare parts and accessories
The following accessories and spare parts can be reordered:
Accessory parts and spare parts can be reordered from:
Z
Page 46, ‘International Service’
click!
32
34
31
30
33
CAUTION:
Clean the filter each time you clean the dust bin. Replace the filter if it is
damaged or deformed (see
Z
Chapter 3.4, ‘Spare parts and accesso-
ries’
for ordering information).
CAUTION:
The exhaust filter cannot be washed.
NOTE:
The exhaust filter cover can be locked more easily if you hold the
release mechanism (Fig. 34) and only release it when the exhaust filter
cover is in its final position.
39
38
36
35
37
WARNING:
Risk of injury! Switch off the appliance after vacuuming (
) and wind up
the power cord (
). When winding up the cord, keep the plug in your
hand so that the cord does not thrash about and cannot injure you.
WARNING:
Risk of injury! Always keep the appliance out of the reach of children.
CAUTION:
Never store the appliance directly next to heat sources (e.g. heater,
oven). Avoid exposure to direct sunlight. Keep the appliance and acces-
sories in a cool, dry place where it does not take up too much space
(Fig. 35 – 39).
CAUTION:
If you intend to store the appliance for a longer period, empty and clean
the dust bin and its filter elements
Z
Chapter 3.1, ‘Empty dust bin and
clean filter elements’
.
Item number
Content
2324001
Filter set consisting of:
1 dual motor protection filter (Fig. 19) +
1 exhaust filter (Fig. 32)
M203-4
1 parquet brush
M219
1 mini-turbo brush "Fellino"
M221
1 mini-turbo brush "Fello"
M232
1 long, flexible crevice nozzle
M236-1
1 Hard floor nozzle
CAUTION:
Only use original spare parts from the scope of delivery or those which
you have purchased by reordering.
DD 2324.book Seite 14 Dienstag, 24. Februar 2015 9:50 21
