GENERAL
MAINTENANCE
13
TOOL REQUIRED: PHILLIPS SCREWDRIVER
WARNING:
TO REDUCE THE RISK OF INJURY FROM MOVING PARTS - UNPLUG BEFORE SERVICING.
Make sure vacuum has been
switched off and unplugged
before changing light bulb.
Also, allow the light bulb
to cool. Remove the two
screws and remove the light
cover.
Remove the burned out light
bulb and pull it from the
socket.
Insert new bulb.
Attach the light cover using both
screws.
To reassemble, be sure tabs
are engaged. Pivot the lower
housing closed.
Pivot lower housing and
remove clog.
Rotate locking ring 180˚ and
turn Power Brush Tool over.
LOCKING RING
DEBRIS REMOVAL/POWER BRUSH TOOL
This cleaner uses a common automotive lamp #906, 13.0 volts. For bulb replacement call 1-800-321-1134 or your local auto parts store.
CHANGING THE LIGHTBULB
1.
2.
3.
4.
1.
2.
3.
Содержание M130000
Страница 46: ...www dirtdevil com ...
